Supported Auxiliary Feature Cases

CETOL Stend-alone version

CETOL v11.3 for MC 보조 피쳐(Auxiliary Feature) 가이드

• CETOL v11.3 for NX
• CETOL v11.3 for CATIA v5-v6

 

 

Auxiliary Point Features

The following auxiliary point feature cases are supported.

Case	Reference	Option	Restrictions
1	Spherical or Toroid surface	At center
2	Circular curve or edge	At center
3	Line² or Axis³	On line/axis	Plane not parallel to line/axis
	Plane⁴	In plane
4	Curve (not linear or circular)	On curve
	Plane⁴	In plane

 

 

Auxiliary Line Features

The following auxiliary line feature cases are supported.

Case	Reference	Option	Restrictions
1	Cylindrical, Conical, or Revolved surface	Through axis
2	Point¹	Through point	Points are not coincident
	Point¹	Through point
3	Line² or Axis³	Parallel to line/axis
	Point¹	Through point
4	Line² or Axis³	Normal to line/axis	Point not on line/axis
	Point¹	Through point
5	Plane⁴	Normal to plane	Point not in plane
	Point¹	Through point
6	Plane⁴	In plane	Planes are not parallel
	Plane⁴	In plane

 

 

Auxiliary Plane Features

The following auxiliary plane feature cases are supported.

Case	Reference	Option	Value	Restrictions
1	Circular curve or edge	Through plane	---
2	Plane⁴	Offset from plane	Offset
3	Plane⁴	Parallel to plane	---	Point not in plane
	Point¹	In plane	---
4	Line² or Axis³	Through line/axis	---	Line and plane are not perpendicular
	Plane⁴	Normal to plane	---
5	Line² or Axis³	Through line/axis	---	Line and plane are parallel
	Plane³	Angle to plane	Angle
6	Line² or Axis³	Through line/axis	---	Point is not on line/axis
	Point¹	Through point	---
7	Line² or Axis³	Through line/axis	---	Lines/axes are coplanar
	Line² or Axis³	Through line/axis	---
8	Line² or Axis³	Normal to line/axis	---
	Point¹	Through point	---
9	Point¹	Through point	---	Points are not collinear
	Point¹	Through point	---
	Point¹	Through point	---

 

 

Auxiliary Cylinder Features

The following auxiliary cylinder feature cases are supported.

Case	Reference	Option	Value
1	Line² or Axis³	Coaxial	Diameter

 

 

Auxiliary Width Features

The following auxiliary width feature cases are supported.

Case	Reference	Option	Value
1	Plane⁴	Symmetric to plane	Width

 

 

 

Note: 

1. Point는 다음 중 하나일 수 있습니다.
   • CAD 모델에서 geometry vertex 또는 geometry vertex
   • CAD 모델에서 구체(spherical) 또는 도넛(toroidal) surface의 중심점
   • CAD 모델에서 원형 곡선(circular curve) 또는 모서리(edge)의 중심점
   • auxiliary point(보조점) feature
2. Line은 CAD 모델에서 선형 곡선(linear curve) 또는 선형 에지(linear edge)일 수 있고, 보조 라인 피쳐(uxiliary line feature)일 수 있습니다.
3. Axis는 기준 축일 수도 있고 CAD 모델에서 축 대칭(axi-symmetric) 표면에서 파생될 수도 있습니다.
4. CAD 모델에서 Plane은 기준 평면 또는 지오메트리 평면 또는 보조 평면 피쳐일 수 있습니다.

둘 이상의 참조(references)가 필요한 경우에는 임의의 순서로 참조(references)를 선택할 수 있습니다.