고정 헤더 영역
상세 컨텐츠
본문
CETOL 6σ Supported Platforms
This document lists the supported platforms for the most recent releases of the CETOL 6σ application.
CETOL 6σ v11.1.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v11.1.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1980 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2021 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M1403 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.4.04 | Windows 10 (64-bit) | |
| Creo Parametric 8.0.1.04 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2021 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release that was used for testing and certification purposes. CETOL 6σ is generally compatible with later maintenance releases within the specified major release.
3. Using CETOL 6σ v11.1.0 with an older maintenance release within the specified major release may be possible but is not recommended.
4. Due to changes PTC introduced with Creo Parametric 7.0.4.0 and 8.0.1.0, CETOL 6σ v11.1.0 will not run properly with older releases (e.g., Creo Parametric 7.0.0.0-7.0.3.0 and 8.0.0.0).
CETOL 6σ v11.0.2
Following are the CAD systems and operating system levels required to run the CETOL 6σ v11.0.2 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1953 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2021 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M1403 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.4.04 | Windows 10 (64-bit) | |
| Creo Parametric 8.0.1.04 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2021 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release that was used for testing and certification purposes. CETOL 6σ is generally compatible with later maintenance releases within the specified major release.
3. Using CETOL 6σ v11.0.2 with an older maintenance release within the specified major release may be possible but is not recommended.
4. Due to changes PTC introduced with Creo Parametric 7.0.4.0 and 8.0.1.0, CETOL 6σ v11.0.2 will not run properly with older releases (e.g., Creo Parametric 7.0.0.0-7.0.3.0 and 8.0.0.0).
CETOL 6σ v11.0.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v11.0.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1953 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2021 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M140 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.2.0 | Windows 10 (64-bit) | |
| Creo Parametric 8.0.0.0 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2021 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v11.0.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v11.0.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v11.0.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1953 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2020 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M140 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.2.0 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2021 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v11.0.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.4.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.4.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1926 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2020 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M030 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.0.0 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2021 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.4.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.4.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.4.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1899 series | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2020 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M030 | Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 7.0.0.0 | Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2018 SP0.1 | Windows 10 (64-bit) |
| SOLIDWORKS 2019 SP0 | Windows 10 (64-bit) | |
| SOLIDWORKS 2020 SP0 | Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.4.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.3.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.3.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1872 | Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2019 | Windows 8.1 64-bit Windows 10 64-bit |
Notes:
1. Access to specific model types is controlled by license options.
CETOL 6σ v10.3.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.3.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 and up to 1847 series | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2019 | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M030 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2018 SP0.1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2019 SP0 | Windows 7 SP1 (64-bit) Windows 10 (64-bit) | |
| SOLIDWORKS 2020 SP0 | Windows 7 SP1 (64-bit) Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.3.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.2.3
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.3 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2018 (R28) | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
Notes:
1. Access to specific model types is controlled by license options.
CETOL 6σ v10.2.2
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.2 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for Creo1 | Creo Parametric 4.0 M010 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 6.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS1 | SOLIDWORKS 2017 SP 3.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2018 SP 0.1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| SOLIDWORKS 2019 SP 0.0 | Windows 7 SP1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.2 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.2.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2018 (R28) | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M010 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2017 SP 3.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2018 SP 0.1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| SOLIDWORKS 2019 SP 0.0 | Windows 7 SP1 (64-bit) Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.2.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 12.0 | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2018 (R28) | Windows 7 SP1 64-bit Windows 8.1 64-bit Windows 10 64-bit |
| CETOL 6σ for Creo2 | Creo Parametric 4.0 M010 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 5.0.0.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS2 | SOLIDWORKS 2017 SP 3.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2018 SP 0.1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. Access to specific model types is controlled by license options.
2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v10.1.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.1.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX1 | Unigraphics V11.0 to NX 11.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| CETOL 6σ for CATIA1 | CATIA V5-6 up to V5-6 R2017 (R27) | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| CETOL 6σ for Creo | Not Released | |
| CETOL 6σ for SOLIDWORKS | Not Released | |
Notes:
1. Access to specific model types is controlled by license options.
CETOL 6σ v10.0.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.1.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL 6σ for NX | Unigraphics V11.0 to NX 11.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| CETOL 6σ for Creo | Not Released | |
| CETOL 6σ for SOLIDWORKS | Not Released | |
CETOL 6σ v9.1.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.1.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for Creo2 | Creo Parametric 2.0 M200 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 3.0 M080 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 4.0 F000 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS | SOLIDWORKS 2016 SP 1.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2017 SP 1.0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| SOLIDWORKS 2018 SP 0.1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.1.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
2. There are separate installers for Creo Parametric 2.0, 3.0 and for Creo Parametric 4.0.
CETOL 6σ v9.1.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.1.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for Creo2 | Creo Parametric 2.0 M200 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| Creo Parametric 3.0 M080 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| Creo Parametric 4.0 F000 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS | SOLIDWORKS 2016 SP1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| SOLIDWORKS 2017 SP0 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.1.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
2. There are separate installers for Creo Parametric 2.0, 3.0 and for Creo Parametric 4.0.
CETOL 6σ v9.0.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.0.1 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for Creo | Creo Parametric 2.0 M100 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) |
| Creo Parametric 3.0 M0602 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS | SOLIDWORKS 2014 SP1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) |
| SOLIDWORKS 2015 SP5 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) | |
| SOLIDWORKS 2016 SP1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.0.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
2. Due to a PTC API bug, the application will cause Creo to crash when importing size dimensions for certain features. This bug is fixed in Creo Parametric 2.0 M200 and 3.0 M080.
CETOL 6σ v9.0.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.0.0 client software. This table applies only to x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for Creo | Creo Parametric 2.0 M100 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) |
| Creo Parametric 3.0 F0002 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CETOL 6σ for SOLIDWORKS | SOLIDWORKS 2014 SP1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) |
| SOLIDWORKS 2015 SP5 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) | |
| SOLIDWORKS 2016 SP1 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.0.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
2. Due to a PTC API bug, the application will cause Creo to crash when importing size dimensions for certain features. This bug is fixed in Creo Parametric 2.0 M200 and 3.0 M080. Creo Parametric 3.0 requires M060 or later on Windows 10.
CETOL 6σ v8.4.3
The following table shows the CAD systems and operating systems for which the CETOL 6σ v8.4.2 client software been certified.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for CATIA | CATIA V5-6R2016 SP2 | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
| CATIA V5-6R2017 GA | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) | |
| CATIA V5-6R2018 GA | Windows 7 SP1 (64-bit) Windows 8.1 (64-bit) Windows 10 (64-bit) |
Notes:
1. The specified CAD System shows the release and service pack that was used for testing and certification purposes. CETOL 6σ is generally compatible with later service packs within the specified release. Using CETOL 6σ v8.4.3 with an older service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v8.4.2
The following table shows the CAD systems and operating systems for which the CETOL 6σ v8.4.2 client software been certified.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for CATIA | CATIA V5-6R2014 SP1 | Windows 7 SP1 (64-bit) |
| CATIA V5-6R20152 GA | Windows 7 SP1 (64-bit) | |
| CATIA V5-6R20162 GA | Windows 7 SP1 (64-bit) |
Notes:
1. The specified CAD System shows the release and service pack that was used for testing and certification purposes. CETOL 6σ is generally compatible with later service packs within the specified release. Using CETOL 6σ v8.4.2 with an older service pack than specified in the table may be possible but is not recommended.
2. CATIA V5-6R2015 and V5-6R2016 are supported but are not officially certified on Windows 8.1 (only limited testing performed).
CETOL 6σ v8.4.1
The following table shows the CAD systems and operating systems for which the CETOL 6σ v8.4.1 client software been certified.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for CATIA | CATIA V5-6R2014 SP1 | Windows 7 SP1 (64-bit) |
| CATIA V5-6R20152 GA | Windows 7 SP1 (64-bit) | |
| CATIA V5-6R20162 GA | Windows 7 SP1 (64-bit) |
Notes:
1. The specified CAD System shows the release and service pack that was used for testing and certification purposes. CETOL 6σ is generally compatible with later service packs within the specified release. Using CETOL 6σ v8.4.1 with an older service pack than specified in the table may be possible but is not recommended.
2. CATIA V5-6R2015 and V5-6R2016 are supported but are not officially certified on Windows 8.1 (only limited testing performed).
CETOL 6σ v8.4.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v8.4.0 client software. This table only applies to x86 and x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS |
| CETOL 6σ for Creo | Creo Elements/Pro 5.0 M160 | Windows 7 SP1 (32-bit & 64-bit) |
| Creo Parametric 2.0 M100 | Windows 7 SP1 (32-bit & 64-bit) | |
| Windows 8.1 (64-bit) | ||
| Creo Parametric 3.0 F000 | Windows 7 SP1 (64-bit) | |
| Windows 8.1 (64-bit) | ||
| CETOL 6σ for SolidWorks | SolidWorks 2013 SP5 | Windows 7 SP1 (32-bit & 64-bit) |
| SolidWorks 2014 SP1 | Windows 7 SP1 (32-bit & 64-bit) | |
| Windows 8.1 (64-bit) | ||
| SolidWorks 2015 SP0 | Windows 7 SP1 (64-bit) | |
| Windows 8.1 (64-bit) | ||
| CETOL 6σ for CATIA | CATIA V5-6R2012 SP2 | Windows 7 SP1 (64-bit) |
| CATIA V5-6R2013 SP4 | Windows 7 SP1 (64-bit) | |
| CATIA V5-6R2014 | Windows 7 SP1 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v8.4.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
CETOL 6σ v8.3.2
Following are the CAD systems and operating system levels required to run the CETOL 6σ v8.3.2 client software. This table only applies to x86 and x64-based workstations.
| CETOL Release | Supported CAD System1 | Supported OS2 |
| CETOL for Pro/ENGINEER | Pro/ENGINEER Wildfire 4.0 M150 | Windows 7 (32-bit) |
| Windows 7 (64-bit) | ||
| Pro/ENGINEER Wildfire 5.0 M040 | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| Creo Parametric 2.0 F000 | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| CETOL for SolidWorks | SolidWorks 2013 SP0 | Windows 7 (32-bit) |
| Windows 7 (64-bit) | ||
| SolidWorks 2014 SP0 | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| CETOL for CATIA | CATIA V5R21 SP23 | Windows 7 (64-bit) |
| CATIA V5-6R2012 SP2 | Windows 7 (64-bit) | |
| CATIA V5-6R2013 SP4 | Windows 7 (64-bit) |
Notes:
1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using 6σ v8.3.2 with an older datecode or service pack than specified in the table may be possible but is not recommended.
2. Windows XP is no longer supported. Microsoft has officially ended support for Windows XP as of April 8, 2014.
3. The CETOL 6σ v8.3.2 workbenches do not start properly in CATIA V5R21 unless SP2 or later is installed.
CETOL 6σ v8.3.1
Following are the CAD systems and operating system levels required to run the CETOL 6σ v8.3.1 client software. This table only applies to x86 and x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL for Pro/ENGINEER | Pro/ENGINEER Wildfire 4.0, M150+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Pro/ENGINEER Wildfire 5.0, M040+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Creo Parametric 1.0 F000+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Creo Parametric 2.0 F000+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CETOL for SolidWorks | SolidWorks 2011 SP4.0+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| SolidWorks 2012 SP4.0+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| SolidWorks 2013 SP0+ | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| SolidWorks 2014 SP0+ | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| CETOL for CATIA | CATIA V5R19 SP9+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5R20 SP5+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5R21 SP2+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5-6R2012 SP0+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) |
· The specified CAD System Release is the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release.
· Using CETOL 6σ v8.3.1 with an older datecode or service pack than specified in the table may be possible but is not certified by Sigmetrix. However, for CATIA V5 R20 and R21, it is NOT possible to use a service pack older than SP2.
CETOL 6σ v8.3.0
Following are the CAD systems and operating system levels required to run the CETOL 6σ v8.3.0 client software. This table only applies to x86 and x64-based workstations.
| CETOL Release | Supported CAD System | Supported OS |
| CETOL for Pro/ENGINEER | Pro/ENGINEER Wildfire 4.0, M150+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Pro/ENGINEER Wildfire 5.0, M040+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Creo Parametric 1.0 F000+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| Creo Parametric 2.0 F000+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CETOL for SolidWorks | SolidWorks 2011 SP4.0+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| SolidWorks 2012 SP4.0+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| SolidWorks 2013 SP0+ | Windows 7 (32-bit) | |
| Windows 7 (64-bit) | ||
| CETOL for CATIA | CATIA V5R19 SP9+ | Windows XP SP3 (32-bit) |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5R20 SP5+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5R21 SP2+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) | ||
| CATIA V5-6R2012 SP0+ | Windows XP SP3 (32-bit) | |
| Windows XP SP2 (64-bit) | ||
| Windows 7 (32-bit) | ||
| Windows 7 (64-bit) |
· The specified CAD System Release is the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release.
· Using CETOL 6σ v8.3 with an older datecode or service pack than specified in the table may be possible but is not certified by Sigmetrix. However, for CATIA V5 R20 and R21, it is NOT possible to use a service pack older than SP2.
반응형
'Learning > 공차분석(CETOL)' 카테고리의 다른 글
| CETOL 6σ v10.3 IS NOW AVAILABLE! (출시) (0) | 2020.03.13 |
|---|---|
| [태성에스엔이] 기하공차(GD&T) 이론과 실무교육으로 구성된 단 한번의 특별 교육! 지금 바로 확인해보세요. (0) | 2019.06.17 |
| [Tip] Bolt(Shaft) 사용하지 않고 CETOL 모델 구성하기 (0) | 2019.06.03 |
| 공차는 왜 중요한가? 플라스틱 제품을 만들었는데 조립이 안 되는 이유는? (0) | 2019.05.09 |
| Sigmetrix 부사장 인터뷰 영상(Autodesk) (0) | 2019.03.28 |
| Sigmetrix Announces They Will Be A Silver Sponsor of 2019 COExperience (0) | 2019.02.21 |
| Sigmetrix to Be a Sponsor of SOLIDWORKS World 2019 (0) | 2019.02.07 |
댓글 영역